* Bitwise Functions and 32-bit
When running the test suite with 32-bit PHP, a failure was reported in BITLSHIFT.
In fact, all of the following are vulnerable to problems, and didn't report
any failures only because of a scarcity of tests:
- BITAND
- BITOR
- BITXOR
- BITRSHIFT
- BITLSHIFT
Those last 2 can be resolved fairly easily by using multiplication by a power of 2
rather than shifting. The first 3 are a tougher nut to crack, and I will continue
to think how they might best be approached. For now, I have added skippable tests
for each of them, which at least documents the problem.
Aside from adding many new tests, some bugs were correctd:
- The function list in Calculation.php pointed BITXOR to BITOR.
- All 5 functions allow null/false/true parameters.
- BIT*SHIFT shift amount must be numeric, can be negative, allows decimal portion
(which is truncated to integer), and has an absolute value limit of 53.
- Because BITRSHIFT allows negative shift amount, its result can overflow
(in which case return NAN).
- All 5 functions disallow negative parameters (except ...SHIFT second parameter).
This was coded, but the code had been thwarted by an earlier is_int test.
* Full Support for AND/OR/XOR on 32-bit
Previous version did not support operands 2**32 through 2**48.
* Improve Coverage of BIN2DEC etc.
The following functions have some special handling
depending on the Calculation mode:
- BIN2DEC
- BIN2HEX
- BIN2OCT
- DEC2BIN
- DEC2HEX
- DEC2OCT
- HEX2BIN
- HEX2DEC
- HEX2OCT
- OCT2BIN
- OCT2DEC
- OCT2HEX
Ods accepts boolean for its numeric argument.
This had already been coded, but there were no tests for it.
Gnumeric allows the use of non-integer argument where Excel/Ods do not.
The existing code allowed this for certain functions but not for others.
Gnumeric consistently allows it, so there is no need for parameter
gnumericCheck in convertBase::ValidateValue.
Again, there were no tests for this.
There were some minor changes needed:
- In functions where you are allowed to specify the numnber of "places" in the
result, there is an upper bound of 10 which had not been enforced.
- Negative values were not handled correctly in some cases.
- There was at least one (avoidable) error on a 32-bit system.
- Some upper and lower bounds were not being enforced. In addition to enforcing
those, the bounds are now defined as class constants in ConvertDecimal.
Many tests have been added, so that Engineering is now almost 100% covered.
The exception is some BESSEL code. There have been some recent changes to
BESSEL which are not yet part of my fork, so I could not address those now.
However, I freely admit that, when I looked at the uncovered portion, it seemed
like it might be a difficult task, so I probably wouldn't have tackled it anyhow.
In particular, the uncovered code seemed to deal with very large numbers,
and, although PhpSpreadsheet and Excel both give very large results for these
conditions, their answers are not particularly close to each other. I think
we're dealing with resuts approaching infinity. More study is needed.
* First step extracting INDIRECT() and OFFSET() to their own classes
* Start building unit tests for OFFSET() and INDEX()
* Named ranges should be handled by the Calculation Engine, not by the implementation of the Excel INDIRECT() function
* When calling the calculation engine to get the range of cells to return, INDIRECT() and OFFSET() should use the instance of the calculation engine for the current workbook to benefit from cached results in that range
There's a couple of minor bugfixes in here; but it's basically just refactoring of the INDIRECT() and OFFSET() Excel functions into their own classes - still needs a lot of work on unit testing; and there's a lot more that could be improved in the code itself (including handling of the a1 flag for R1C1 format in INDIRECT()
* Continue MathTrig Breakup - Trig Functions
Continuing the process of breaking MathTrip.php up into smaller classes.
This round takes care of the trig and hyperbolic functions, plus a few others.
- COS, COSH, ACOS, ACOSH
- COT, COTH, ACOT, ACOTH
- CSC, CSCH
- SEC, SECH
- SIN, SINH, ASIN, ASINH
- TAN, TANH, ATAN, ATANH, ATAN2
- EVEN
- ODD
- SIGN
There are no bug fixes in this PR, except that boolean arguments are now
accepted for all these functions, as they are for Excel.
Taking a cue from what has been done in Engineering, the parameter validation
now happens in a routine which issues Exceptions for invalid values;
this simplifies the code in the functions themselves.
Consistent with earlier changes of this nature, the versions in the
MathTrig class remain, with a doc block indicating deprecation,
and a stub call to the new routines.
I think several more iterations will be needed to break up MathTrig completely.
* Replace manual wildcard logic in MATCH() function with the new WildcardMatch methods
* Additional unit tests
* Refactor input validations
* Refactor actual search logic into dedicated methods
* Eliminate redundant code
* Extract LookupRef\INDEX() into index() method of LookupRef\Matrix class
Additional tests
* Bugfix for returning a column using INDEX()
* Some improvements to ROW() and COLUMN()
* Simplify some of the INDEX() logic, eliminating redundant code
* Start refactoring the Lookup and Reference functions
- COLUMN(), COLUMNS(), ROW() and ROWS()
- LOOKUP(), VLOOKUP() and HLOOKUP()
- Refactor TRANSPOSE() and ADDRESS() functions into their own classes
* Additional unit tests
- LOOKUP()
- TRANSPOSE()
- ADDRESS()
- Move TREND() functions into the Statistical Trends class
- Unit tests for TREND()
- Create Confidence class for Statistical Confidence functions, and the CONFIDENCE() method
* Start splitting some of the basic Statistical functions out into separate classes containing just a few similar functions
* Splitting some of the basic Statistical functions out into separate classes containing just a few similar functions - MAX(), MAXA(), MIN() and MINA()
* Splitting some more of the basic Statistical functions out into separate classes containing just a few similar functions - StandardDeviations and Variances
* 100% Coverage for Calculation/DateTime
The code in DateTime is now completely covered.
Along the way, some errors were discovered and corrected.
- The tests which have had to be changed at the start of every year are
replaced by more robust equivalents which do not require annual changes.
- Several places in the code where Gnumeric and OpenOffice were thought to differ
from Excel do not appear to have had any justification.
I have left a comment where such code has been removed.
- Use DateTime when possible rather than date, time, or strftime functions to avoid
potential Y2038 problems.
- Some impossible code has been removed, replaced by an explanatory comment.
- NETWORKDAYS had a bug when the start date was Sunday. There had been no tests
of this condition.
- Some functions allow boolean and null arguments where a number is expected.
This is more complicated than the equivalent situations in MathTrig because
the initial date for these calculations can be Day 1 rather than Day 0.
- More testing for dates from 1900-01-01 through the fictitious
everywhere-but-Excel 1900-01-29.
- This showed that there is an additional Excel bug - Excel evaluates
WEEKNUM(emptycell) as 0, which is not a valid result for
WEEKNUM without a second argument.
PhpSpreadsheet now duplicates this bug.
- There is a similar and even worse bug for 1904-01-01 in 1904 calculations.
Weeknum returns 0 for this,
but returns the correct value for arguments of 0 or null.
- DATEVALUE should accept 1900-02-29 (sigh) and relatives.
PhpSpreadsheet now duplicates this bug.
- Testing bootstrap sets default timezone. This appears to be a relic from
the releases of PHP where the unwise decision, subsequenly reversed,
was made to issue messages for
"no default timezone is set" rather than just use a sensible default.
This was a disruptive setting for some of the tests I added.
There is only one test in the entire suite which is default-timezone-dependent.
Setting and resetting of default timezone is moved to that test
(Reader/ODS/ODSTest), and out of bootstrap.
- There had been no testing of NOW() function.
- DATEVALUE test had no tests for 1904 calendar and needs some.
- DATE test changed 1900/1904 calendar in use without restoring it.
- WEEKDAY test had no tests for 1904 calendar and needs some.
- Which revealed a bug in Shared/Date (excelToDateTimeObject was not
recognizing 1904-01-01 as valid when 1904 calendar is in use).
- And an additional bug in that legal 1904-calendar values in the 0.0-1.0
range yielded the same "wrong" answers as 1900-calendar (see "One note" below).
Also the comment for one of the calendar-1904 tests was wrong in attempting
to identify what time of day the fraction represented.
I had wanted to break this up into a set of smaller modules, a process already
started for Engineering and MathTrig.
However the number of source code changes was sufficient that I wanted
a clean delta for this request.
If it is merged, I will work on breaking it up afterwards.
One note - Shared/Date/excelToDateTimeObject, when calendar-1900 is in use,
returns an unexpected result if its argument is between 0 and 1,
which is nominally invalid for that calendar.
It uses a base-1970 calendar in that instance. That check is not justifiable
for calendar-1904, where values in that range are legal,
so I made the check specific to calendar-1900,
and adjusted 3 1904 unit test results accordingly. However, I have to admit that
I don't understand why that check should be made even for calendar-1900.
It certainly doesn't match anything that Excel does.
I would recommend scrapping that code altogether.
If agreed, I would do this as part of the break-up into smaller modules.
Another note -
more controversially, it is clear that PhpSpreadsheet needs to support
the Excel and PHP date formats. Although it requires further study,
I am not convinced that it needs to support Unix timestamp format.
Since that is a potential source of Y2038 problems on 32-bit systems,
I would like to open a PR to deprecate the use of that format.
Please let me know if you are aware of a valid reason to continue to support it.
- Refactoring of the Statistical Conditional functions (`AVERAGEIF()`, `AVERAGEIFS()`, `COUNTIF()`, `COUNTIFS()`, `MAXIFS()` and `MINIFS()` to use the new Database functions codebase.
- Extended unit testing
- Fix handling for null values
- Fixes to wildcard text searches
There's still scope for further improvements to memory usage and performance; but for now the code is stable with all unit tests passing
* Support 'Forms' for ROMAN Function
This seems like an exceptionally silly thing for MS to have implemented
(Wikipedia on Roman Numerals: "There is no indication this is anything
other than an invention by the programmer").
Nevertheless, we can, and therefore probably should, implement it.
Not that I can implement it by an algorithm - Excel describes the various extra
styles as "more concise", "more concise", "more concise", and "simplified".
Nevertheless, since the universe of potential calls is relatively small,
it can be implemented as a table of values where the new forms would return
a different value than "classic". This table is relatively large, so I have
put it its own member to avoid overhead when the function is needed.
* Move ROMAN To Its Own Class
See discussion in PR #1837
* PHP 8.1 Deprecations
PHP8.1 Unit tests failed. 1 line fixes are available for
- Shared/Font
- Shared/XMLWriter
- Style/Color
- Writer/HTML
The problem is that an error is also reported for a strcmp at
line 272 of Cell/Cell. Not only does that line not invoke strcmp,
there is no strcmp in all of Cell/Cell, so I don't know what to make
of the error message. Oh well, let's fix what can be fixed.
Still dealing with the mysterious PHP8.1 unit test failure in Cell\Cell,
which seems to have something to do with strcmp. The only uses of
strcmp that I can find in src/ are in Calculation. I can't find any
use of it in test/ or samples/. So, if this doesn't fix the problem,
I may have to give up.
* ROUND Accepts null, false, and true as First Parameter
Issue #1789 was addressed by PR #1799. In a follow-up discussion,
it came to light that ROUND was not handling the unexpected case where the
first parameter is an empty cell in the same manner that Excel does.
Subsequent investigation showed that a boolean first parameter is permitted.
I broadened my investigation to include the following related functions.
- ROUNDUP
- ROUNDDOWN
- MROUND
- TRUNC
- INT
- FLOOR
- FLOOR.MATH
- FLOOR.PRECISE
- CEILING
- CEILING.MATH
- CEILING.PRECISE
All of these allow a NULL first parameter, and all except MROUND allow boolean.
For completeness, I will note that all treat null string as invalid.
I suspect there are other functions which permit
similarly unexpected parameters, but I consider them out of scope for this PR.
CEILING.MATH and CEILING.PRECISE were unimplemented, and are now supported
as part of this PR.
The tests for each of these functions have been re-coded, though all the original
test data is still included in the test cases, plus several new cases for each.
The new tests now take place as a user would invoke the functions,
through a spreadsheet cell rather than a
direct call to the appropriate function within Calculation/MathTrig.
Aside from being more realistic, the new tests are also more complete.
For example, FLOOR.MATH can take from 1-3 arguments, and the existing tests
confirmed that the function in Calculation could handle a single argument.
However, the function list in Calculation.php erroneously set the number of
arguments for FLOOR.MATH to exactly 3, so, if a user tried to get the calculated
result of a cell containing FLOOR.MATH(1.2), the result would be an Exception.
Aside from the parameter support, there are a few minor code changes.
Ods, as well as Gnumeric, allows the omission of the second parameter for
FLOAT and CEILING; Excel does not. A potential divide-by-zero error is
avoided in CEILING, FLOOR, and FLOORMATH.
I will note that it would probably be beneficial in terms of maintainability
to break MathTrig up into many individual modules. The same would hold for the
other Calculation modules. I would be willing to look into this if you agree
that it would be worthwhile.
* Extract DELTA() and GESTEP() functions from the Engineering class into a dedicated Comparison classes
Retain the original methods in the Engineering class as stubs for BC, but deprecate them. They will be removed for PHPSpreadsheet v2
Note that unit tests still point to the Engineering class stubs; these should be modified to use the Erf and ErfC classes directly when the stubs are removed
* Extract Permutation functions from the Statistical class into a dedicated Permutations class
Retain the original methods in the Statistical class as stubs for BC, but deprecate them. They will be removed for PHPSpreadsheet v2
Note that unit tests still point to the Statistical class stubs; these should be modified to use the Permutations class directly when the stubs are removed
Also provided a basic implementationof the PERMUTATIONA() Function
* Additional unit tests for previously untested financial functions, and some additions to follow untested paths
* Start splitting Financial function tests out from the large FinancialTests class into individual test classes for each function
* Problems Using Builtin PHP Functions Directly As Excel Functions
This fixes issue #1789.
As originally reported, stricter typing was causing PHP8 to throw
an exception when a non-numeric value was passed to the Round function.
Previous releases of PHP did not see this problem, however, on further
analysis, they were also incorrect in returning 0 as the result in the
erroneous situation, when they should have been returning a VALUE error.
Yet more analysis showed that other functions would also have problems,
and, in addition, might not handle invalid input (e.g. a negative length
passed to REPT) or output (e.g. NAN in the case of ACOS(2)) correctly.
The following MathTrig functions are affected:
ABS, ACOS, ACOSH, ASIN, ASINH, ATAN, ATANH,
COS, COSH, DEGREES (rad2deg), EXP, LN (log), LOG10,
RADIANS (deg2rad), REPT (str_repeat), SIN, SINH, SQRT, TAN, TANH.
One TextData function (REPT) is also affected.
This change lets PhpSpreadsheet validate the input for each of these
functions before passing control to the builtin, and handle the output
afterwards.
There were no explicit tests for any of these functions, a fact made
easy to ignore by the fact that PhpSpreadsheet delegated the heavy
lifting to PHP itself for these cases. A full suite of tests is
now added for each of the affected functions.
* Scrutinizer Recommendations
Only in 3 modules which are part of this PR.
* Improved Handling of Tan(PI/2)
Return DIV0 error for TAN when COS is very small.
* Additional Trig Tests
Results which should be infinity, i.e. DIV/0 error.
Now supports all current UoM in all categories, with both 1- and 2-character multiplier prefixes, and binary multiplier prefixes, including the new Temperature scales
This had been intended to get 100% coverage for TextData functions, and it does that.
However, some minor bugs requiring source changes arose during testing.
- the Excel CHAR function restricts its argument to 1-255. PhpSpreadsheet CHARACTER
had been allowing 0+. Also, there is no need to test if iconv exists,
since it is part of Composer requirements.
- The DOLLAR function had been returning NUM for invalid arguments. Excel returns VALUE.
Also, negative amounts were not being handled correctly.
- The FIXEDFORMAT function had been returning NUM for invalid arguments. Excel FIXED returns VALUE.
* Initial work modifying the way named ranges are stored, and handled by the calculation engine
This should provide better support for:
- both union and intersection operators in composite named range values
- MS Excel implementation of the union operator duplicating values
- named formulae
- named ranges and formulae that reference other named ranges and formulae
- ranges and formulae that reference multiple ranges across multiple worksheets
* Initial work on handling defined names (named ranges and named formulae) correctly
- UTF-8 names (already extracted as a separate PR and merged)
- distinction between named ranges and named formulae
- correct handling of union and intersection operators in named ranges
- correct evaluation of named range operators in calculations
- calculation support for named formulae
- support for nested ranges and formulae (named ranges and formulae that reference other named ranges/formulae) in calculations
* Minor tweaks before resolving merge conflicts
* Fix extractSheetTitle() method to work on the last ! in a cell reference rather than the first
* Throw exception if a the reference to a defined name in a formula doesn't exist as a defined name
* Properly assess scope for defined names in calculation engine
* Elimination of some redundant code
* Minor tweaks to simplify entries o the stack where we need to check type
* Ensure correct scoping rules are applied when evaluating named ranges and formulae
* Adjustments to Gnumeric Reader for new defined names structure
* Initial work modifying the Ods Reader to handle named ranges, they weren't actually supported previously... this is still ongoing work
* Handle Ranges formatted as 3-d ranges, as long as the references are both to the same worksheet
* Additional testing for Named Ranges formatted as 3-d ranges, as long as the references are both to the same worksheet
* Skip composite named range tests for the moment
* Clean handling for `undefined name` exception when thrown in the calculation engine. Catch and replace with `#NAME?`
* Adjust method we use to determine whether a defined name is a range or a formula
* PHPCS Recommendations
* PHP doesn't support `mixed` yet, at least not at the minium version that we're working with
* More phpcs fixes
* More phpcs appeasements
* Final phpcs fixes for the moment
Still have a lot of echo and var_dump() statements in the code that scrutinizer will hate, but they stay for the moment while this is still WIP
* Please let this be the last of the phpcs fixes
* Unit tests to determine whether a defined name value is a range value or a formula
* phpcs appeasement
* Named tests from provider
* Initial steps for named ranges and formulae in the Ods Reader
* Reading pseudo-3d range addresses in Ods; treat second sheet reference as being identical to the first, which is the majority of cases where this will occur
* Initial work on Gnumeric reader for named ranges and formulae
* Suppress debug logging again
* Remove more debugging displays
* Last minor tweaks before phase two
* Minor refinements
* And all for the want of a space
* A little tidying up
* More tidying up
* phpcs fix
* Modify defined names in rebindParent()
* Renaming variables
* Resolve an issue with locally scoped defined names that don't contain any worksheet reference
* Keep phpcs happy
* Fix quote handling in regexp
* Fix a couple of scrutinizer issues
* Fix a couple of scrutinizer issues
* Update Xlsx Writer to work with the new defined name internal definition
Additional validation checks
* When adding new defined names through the readers, worksheet may not exist if we're only loading selected sheets rather than the full spreadsheet
* If the only thing that phpcs can pickup on is strings in double quotes instead of single quotes, then I know I'm getting close to ready
* Refactor Defined Names logic for Xlsx Writer into its own class
* phpcs keeping me on my toes
* Restore a couple of files that I managed to change without intending to
* Initial work on Ods Write to provide support for saving named ranges and formulae
* Resolve commas to semi-colons s argument separator when writing named formulae for Ods
* Extract Named Expression Writer for Ods into its own class
* Keep phpcs happy
* Refactoring of formula conversion when reading SpreadsheetML; preparation for reading named ranges because they will also need to use the same conversion method
* First pass at reading Named Ranges/Formulae from SpreadsheetML format xml files
* Remove unused namespace reference
* Defined names being written correctly for Xls; but not yet writing cell formulae that reference those defined names... that's the next big step
And I anticipate that defined names that reference other defined names will also be a problem
* Just to keep phpcs happy
... and yes, I know that there are still diagnostic echo statements in the code
* I had to miss some of the phpcs issues didn't I
* Work on the Xls Writer's Parser Tree to identify named range tokens in a formula, and to distinguish them from function tokens
* Still working on packing that d*** defined name reference in the writer
* Throw an exception in the Parser for saving Xls output if we encounter a defined name in a formula... writer will simply write the calculated cell value, and not the formula as at present
Strip out diagnostic output
* Some phpcs appeasement
* Fix a couple of Scrutinizer issues
* Additional verifications to differentiate a formula from a range value
Add explicit getters/setters for named ranges, named formulae and defined names
Additional unit tests
* Styling for closures
* Remove redundant docblocks
* Spaces
* Gah! Namespace use complaints
* Consistency of making calls to DefinedName rather than NamedRange; NamedRange should now be used only for Named Ranges, and should exclude Named Formulae
* Styling
* spurious newline
* No need to test for variable === null when we're typing it in the function argument definition
* Additional unit tests for local/global scoped named ranges and formulae; and a fix to getNamedFormula()
* Fix silly typo that led to breaking test
* Void return signature for unit tests
* Why weren't these picked up in the last pass?
* Refactoring of getNamedRange()/getNamedFormula()
* Eliminate unused constants, and defaults for private method parameters when always called with a value
* Use strict comparisons when comparing object hash codes
* Initial update to documentation for working with named formulae
* Fix for calculation of relative cell references in named ranges/formulae
* Fix current named range tests, because we should be using absolute references; tests for relative named ranges to be added later
* Fix for calculation of relative cell references in named ranges/formulae
* Updates to changelog and documentation for handling of absolute/relative references in named ranges
* Fix last remaining unit test with a named range reference
* Refactor formula conversion for Ods into a separate class; I hadn't realised that it previously wrote formulae as the MS Excel syntax without any conversion to Ods format
* Fix Ods Writer test xml to reflect Ods-native format for formula
* Docblocks
* Drop dollar prefix from Ods formulae and ranges unless it's necessary
* Set the formula convertor in the content writer constructor
* Documentation update
* Minor updates
* Remove var_dumps from file
* Fix the spurious single quote that was breaking named expressions in the Ods Writer... big sigh of relief that I finally spotted it
* Starting work on documentation for Defined Names, and some examples of using Named Ranges and Formulae
* Starting work on documentation for Defined Names, and some examples of using Named Ranges and Formulae
* Example of a relative named range for the documentation
* Mustn't have phpcs problems in sample code either
* More updates to the documentation
* That should conclude the documentation for Named Ranges, now time to move on to documenting Named Formulae
* That should conclude the documentation for Named Ranges, now time to move on to documenting Named Formulae
* PHPCS appeasement in sample code
* Initial documentation on Named Formulae
* PHPCS appeasements
* Additional comments in the documentation, and modify the named range name validation to support a \ as the first character in a name
* Fix breaking build
* Make defined names case-insensitive
* Fix case-insensitivity
* Improved documentation, and additional unit tests
* Additional unit tests, and a fix for removing a globally scoped defined name even if a worksheet is specified in the method call
* Fix unit test for removing named formulae
* Use assertCount instead of assertSame
* Forgotten voids
* Fix arguments for assertCount
* Unit tests for removing defined names, and a fix for removing locally scoped names
* Unit tests for absolute and relative named ranges in calculation engine, and fix an issue with worksheet name in the offset adjustments for relative references
* PHPCS Appeasement
* Additional unit tests, more documentation, and a fix to the calculation engine when no worksheet reference is provided with a named formula
* PHPCS appeasements
* Additional documentation and examples of using Named Formulae
* Additional examples to go with documentation
* A few minor phpcs appeasements
* Minor refactor of updateFormulaReferencesAnyWorksheet() method
* Discard an unused method argument
* Additional unit tests
* Additional unit tests
* Remove unused argument
* Stricter typing
* Fix return typehinting from remove named range/formula; should return the Spreadsheet object
* Use return typehint of self rather than explicit object type
* Redundant code just to keep scrutinizer happy
* Minor change to handle merge conflict
* phpcs fixes after merge
* Namespace usage ordering
* Please let this be the last phpcs fix needed
Co-authored-by: Adrien Crivelli <adrien.crivelli@gmail.com>
* `GAUSS()` and `GAMMA()`, `NORM.S.DIST()`, `LOGNORM.DIST()` and `F.DIST()` function implementations, and further unit tests for a number of the statistical functions
Co-authored-by: Adrien Crivelli <adrien.crivelli@gmail.com>
HTTP client must be configured via `Settings::setHttpClient()`. This is
a small breaking change, but only for the very few people who started using
WEBSERVICE from last version.
Fixes#1562Closes#1568
Fixes a bug when doing a HLOOKUP on a single row.
```php
<?php
require 'vendor/autoload.php';
use PhpOffice\PhpSpreadsheet\Spreadsheet;
$spreadsheet = new Spreadsheet();
$sheet = $spreadsheet->getActiveSheet();
/**
* Single row.
*/
$singleRow = "=HLOOKUP(10, {5, 10, 15}, 1, 0)";
$sheet->getCell('A1')->setValue($singleRow);
// Should echo 10, but echos '#N/A' and some PHP notices and warnings.
echo $sheet->getCell('A1')->getCalculatedValue() . PHP_EOL;
/**
* Multiple rows.
*/
$multipleRows = "=HLOOKUP(10, {5, 10, 15; 20, 25, 30}, 1, 0)";
$sheet->getCell('A2')->setValue($multipleRows);
// Should echo: 10 and also does.
echo $sheet->getCell('A2')->getCalculatedValue() . PHP_EOL;
```
Co-authored-by: Mark Baker <mark@lange.demon.co.uk>
Bugfix for negative results and too small results
2000-02-02 => 2001-02-01
> DATEDIF with Y unit: 0 year (returned -1 before fix)
> DATEDIF with YM unit: 11 months (returned -1 before fix)
For functions introduced in Excel 2010 and beyond, Excel saves them
in formulas with the xlfn_ prefix. PhpSpreadsheet does not do this;
as a result, when a spreadsheet so created is opened, the cells
which use the new functions display a #NAME? error.
This the cause of bug report 1246:
https://github.com/PHPOffice/PhpSpreadsheet/issues/1246
This change corrects that problem when the Xlsx writer encounters
a 2010+ formula for a cell or a conditional style. A new class
Writer/Xlsx/Xlfn, with 2 static methods,
is introduced to facilitate this change.
As part of the testing for this, I found some additional problems.
When an unknown function name is used, Excel generates a #NAME? error.
However, when an unknown function is used in PhpSpreadsheet:
- if there are no parameters, it returns #VALUE!, which is wrong
- if there are parameters, it throws an exception, which is horrible
Both of these situations will now return #NAME?
Tests have been added for these situations.
The MODE (and MODE.SNGL) function is not quite in alignment with Excel.
MODE(3, 3, 4, 4) returns 3 in both Excel and PhpSpreadsheet.
However, MODE(4, 3, 3, 4) returns 4 in Excel, but 3 in PhpSpreadsheet.
Both situations will now match Excel's result.
Also, Excel allows its parameters for MODE to be an array,
but PhpSpreadsheet did not; it now will.
There had not been any tests for MODE. Now there are.
The SHEET and SHEETS functions were introduced in Excel 2013,
but were not introduced in PhpSpreadsheet. They are now introduced
as DUMMY functions so that they can be parsed appropriately.
Finally, in common with the "rate" changes for which I am
creating a pull request at the same time as this one:
samples/Basic/13_CalculationCyclicFormulae
PhpUnit started reporting an error like "too much regression".
The test deals with an infinite cyclic formula, and allowed
the calculation engine to run for 100 cycles. The actual number of cycles
seems irrelevant for the purpose of this test. I changed it to 15,
and PhpUnit no longer complains.
oleibman
Mark Baker
ElPopcorn
Martins Sipenko
Flinsch
Adrien Crivelli
paulkned
Dawid Warmuz
Arne Jørgensen
Alban Duval